Water Softeners


Reverse Osmosis


Iron & Odours


Pumps


Chlorination

Sanitation
Ultra Violet Systems


Constant Pressure Systems

 

Reverse Osmosis Products
:: Commercial ::

Reverse Osmosis
  HomeWater SolutionsReverse Osmosis → Reverse Osmosis Commercial Product → Information

Reverse Osmosis Frame Vertical Units - 1,500 - 1,800 GPD

Standard Features:

  • Powder-coated steel frame
  • Stainless steel multi-stage pump
  • Reverse Osmosis membrane
  • Stainless steel membrane vessel
  • High-pressure nylon tubing
  • Liquid-filled high pressure gauge
  • Inlet/outlet pre-filter gauges
  • Liquid-tight wire shrouding
  • Feed water inlet solenoid valve
  • Product/Waste flow meters
  • 10” 5 micron BB pre-filter
  • High-press. brass comp. fittings
  • Up to 60% feed flow recovery rate
  • S.S. adjustable Waste/Recycle needle valves
Options:

  • Automatic hourly flush
  • TDS digital monitor
  • Hour meter
  • Recycle flow meter
  • Tank pressure switch (product)
  • High pressure cut-off w/auto restart and manual override
  • Pre-treat lock-out with light
  • 50 hz electrical requirement
  • 3 phase power supply
  • Nanofiltration membrane
  • Super Hi-Flow membrane
  • intelligent Control Processor (ICP)

Filtration Station

  • Pre-plumbed and pre-wired to minimize installation time.
  • 600 gallons of product water storage, tank adaptors, and fittings are also included.

 

 

 

click on images below to view brochure

Compact


150 - 1,600 gpd

Compact II

150 - 1,600 gpd

 

Economy Frame Mount

1,800 - 12,000 gpd

Frame Mount Vertical

1,800 - 12,000 gpd

 

Water Store

1,800 - 11,750 gpd

Whole-House System

(shown 1,800 gpd)

Reverse Osmosis Compact 1

Standard Features:

  • Thin film composite membrane
  • Stainless steel membrane vessel
  • Powder-coated steel frame
  • Liquid-filled system pressure gauge
  • Inlet/Outlet pre-filter gauges
  • Fixed waste/recycle flow controls, stainless steel
  • High-pressure nylon tubing
  • High-pressure brass comp. fittings
  • Storage tank pressure switch
  • Feed water inlet solenoid valve
  • Feed water low pressure switch
  • 1/2 hp motor (150-450 gpd)
  • 3/4 hp motor (800 gpd)
  • 10” 5 micron sediment pre-filter (1)
  • 10” carbon block pre-filters (2)
  • 110 volt-50/60hz
Options:

  • Nanofiltration membrane
  • Super Hi-Flow membrane
  • Float switch for atmospheric tank
  • 220 volt-50/60hz
  • Wall Mount Design

Frame Mount ICP Commercial RO

Accessories


Home | Products | FAQs | About BRM | Contact | Sitemap
© Copyright BRM Water Conditioning Inc.| Moxie Web Design | Back to Top of Page